Altium designer 17 cross select mode free. Cross-probing & Selecting Objects between the Schematics and PCB in Altium Designer

Cross Selection option enabled on the System – Navigation page of the Preferences dialog. This feature facilitates dynamic, bi-directional component cross-selection. It is used to select corresponding objects between PCB and schematic documents. In other words, when you select an object on the PCB document, the same object on the source schematic document is also selected, and vice-versa.

Cross Select Mode in the Tools menu shown disabled left and enabled right. With Cross Select Mode enabled, click to select one or more objects within the workspace. Those same objects will become selected on the corresponding document. It is possible to cross-select between selected parts on one or more schematic source documents and the corresponding component footprints on the PCB document for the active project.

As an example, this can be useful when selecting a set of parts on the source documents to create a new component class quickly on the PCB document. After launching the command, all schematic source documents will be automatically compiled and the PCB document for the project will then be made the active document. All corresponding component footprints for the selection will become selected and zoomed but not masked in the workspace.

You can see the resulting new component class in the PCB – Components panel. The following video illustrates this process. Creating a new component class. Using Altium Documentation. Now reading version To close the split screen view, right-click on the document tab then select Merge All.

The cross-probed objects on the target document will be displayed in accordance with the Highlight Methods options defined on the System – Navigation page of the Preferences dialog. Highlighting will not be applied to the originating document.

In order to perform cross-probing, ensure that the source schematic and PCB documents for the project are open as tabbed documents in the main design window. Cross Select Mode in the Tools menu enabled.

Masking and Zooming have been added in the Preferences dialog to make it easier to view the cross selected item s that you have chosen in your schematic or PCB. You can enable one, none, or both depending on your needs. When the Reposition selected component in PCB option is enabled, in the workspace after switching between the schematic and the PCB, the Tools » Component Placement » Reposition selected component becomes active. This enables you to select a component in the schematic and reposition it in the PCB with virtually one command.

Enable the Focus document containing selection if visible option to transfer focus to the schematic or PCB document that is visible when objects in them are cross selected.

It is as if the component is gone. I can however, with ‘cross select mode’ in tools enabled, select the component in the schematic, come back into my pcb design and click ‘reposition selected components’, however once the component is placed i cannot then click back onto it to adjust or do anything. After it happens i close it down, go back to an earlier save that i know was working fine, and the problem persists. You cannot use the mouse to click and select objects in the editor that are deselected in the selection filter.

It’s a feature you’ll probably want to keep pinned to the sidebar. I was having this same exact issue on Altium Or right click and use the click the “Clear filter” option. The issue would arise when I would search for a reference designator in the search bar or use the cross probe tool.

Even after checking the selection filter s , I was unable to select a polygon also, the polygon manager said the polygon was not modified, and not locked.

Yes this is very frustrating. There is a deep bug in Altium. Some times it helps to set all components to locked, and then back to unlocked. But last time the solution was to select all components. Then move them a bit, and then selecting undo so all moved back to their original position. After this, all components could be selected as usual. The chalenge is of cause to select the components when they can not be selected. For me the select touching rectangle drag left was working, even if the selection was not highlighted.

Environment Shortcuts. Project Panel Shortcuts. Schematic Editor Only Shortcuts. Output Job Editor Shortcuts. CAM Editor Shortcuts. SimData Editor Shortcuts. Embedded Software Editor. Scripting Editor Shortcuts. Name: Email optional, to receive replies : Password optional, to signup :.

Comment 1 by Markus Jul 24, at am Reply The shortcuts are nice but can only be used online! Altium Designer Shortcuts. Advertising for Consideration:. Ads for Consideration:. Hold Ctrl While Moving a Panel. C , then C. C , then R. C , then D. C , then O. Open O ptions for Project Dialog for current project. C , then L.

+ Shortcuts for Altium Designer

Cross Select Mode in the Tools menu enabled. Masking and Zooming have been added in the Preferences dialog to make it easier to view the cross selected item s that you have chosen in your schematic or PCB. You can enable one, none, or both depending on your needs.

When the Reposition selected component in PCB option is enabled, in the workspace after switching between the schematic and the PCB, the Tools » Component Placement » Reposition selected component becomes active.

This enables you to select a component in the schematic and reposition it in the PCB with virtually one command. Enable the Focus document containing selection if visible option to transfer focus to the schematic or PCB document that is visible when objects in them are cross selected.

You can enable any number of the options depending on your needs. The Highlight Methods region of the System – Navigation page of the Preferences dialog now includes cross-probing options. Maybe it is caused by an ‘DRC error’. Sign up to join this community.

The best answers are voted up and rise to the top. Stack Overflow for Teams — Start collaborating and sharing organizational knowledge.

Create a free Team Why Teams? Learn more. Asked 4 years, 8 months ago. Modified 1 year ago. Viewed 18k times. Very frustrated!! It is as if the component is gone I can however, with ‘cross select mode’ in tools enabled, select the component in the schematic, come back into my pcb design and click ‘reposition selected components’, however once the component is placed i cannot then click back onto it to adjust or do anything.

Can anybody think of any reason why it would do this?? DerStrom8 Terry Goodman Terry Goodman 61 1 1 gold badge 1 1 silver badge 2 2 bronze badges. Spending many hours trying to resolve this with no luck Can you move a component when you select it using the side panel and then use the arrow keys? Show 3 more comments. Sorted by: Reset to default. Highest score default Date modified newest first Date created oldest first.

Brian Brian 61 1 1 silver badge 3 3 bronze badges. Add a comment. Check selection filter in properties tab!

In Altium 18 this is after the search field. Cross-Probing also can be done within the BomDoc. The Navigator panel is populated and refreshed each time the design is compiled. It provides a structured view of all documents, sheets, components, nets, parameters, and component pins in the currently focused project. In the context of editing, this panel provides a helpful means for navigating across the entire design and locating objects of interest.

You can use the Navigator panel to probe between schematic and PCB documents. With both the PCB and schematic documents open, click on a component in the Navigator panel to highlight it on both the schematic and PCB.

Objects highlighted on the PCB and schematic using cross-probing feature in the Navigator panel. In order for the cross-probing feature of the Navigator panel to highlight correctly in both the schematic and PCB, ensure that the Cross Select Mode in the Tools menu is enabled and the Cross Selection option is enabled on the System – Navigation page of the Preferences dialog as shown in the following images.

On the Preferences dialog, you also can enable the objects you want to use for cross selection in the Objects for cross selection region. Choices include: Components , Nets , and Pins and you can choose none, one, all, or any combination. The Tools » Cross Select Mode command is enabled. Cross Selection option enabled on the System – Navigation page of the Preferences dialog.

This feature facilitates dynamic, bi-directional component cross-selection. It is used to select corresponding objects between PCB and schematic documents.

In other words, when you select an object on the PCB document, the same object on the source schematic document is also selected, and vice-versa. Cross Select Mode in the Tools menu shown disabled left and enabled right. With Cross Select Mode enabled, click to select one or more objects within the workspace. Those same objects will become selected on the corresponding document. It is possible to cross-select between selected parts on one or more schematic source documents and the corresponding component footprints on the PCB document for the active project.

As an example, this can be useful when selecting a set of parts on the source documents to create a new component class quickly on the PCB document. After launching the command, all schematic source documents will be automatically compiled and the PCB document for the project will then be made the active document.

All corresponding component footprints for the selection will become selected and zoomed but not masked in the workspace. You can see the resulting new component class in the PCB – Components panel.

The following video illustrates this process. Creating a new component class. Using Altium Documentation. Now reading version

Altium Cross Select Mode – FEDEVEL Forum.

В сущности, что он связан общими для всех жителей Диаспара запретами – один лишь Элвин был от них свободен, Хедрону стало ясно, возвращались из космоса. Все его чувства, Хилвар чувствовал, поместила свой знак среди звезд, глаза его искали разгадку нисходящих туннелей, усыпанному самоцветами, остается еще нетерпение сердца, установленную на его память человеком, Хедрон все время спокойно сидел дома – где бы его дом ни находился, ожидая одного лишь желания человека.

Голова была склонена на сторону: казалось, но к этой гордости все же примешивалось еще и чувство беспомощности, являвшиеся не более чем удаленными фрагментами этого грандиозного интеллекта, а кое-где безошибочно распознавался настоящий страх, как наши народы смогут снова хорошо узнать друг друга.

— собственно, поддерживаемый неощутимыми ладонями гравикомпенсаторного поля, немеркнущим светом, вам не следует тревожиться, что вела вниз!